LOX-8 Full Density PTFE Tape is approved for oxygen service. Fluoramics has the testing documentation to show it is oxygen approved. Is your oxygen-safe PTFE Tape tested in pure oxygen?

LOX-8 Full Density PTFE Tape was tested and approved to the following specifications:

  • Steady-state oxygen service temperature limit per ASTM G63 equals 372° C or 701° F.
  • Steady-state oxygen service pressure limit per ISO 21010 equals ≤ 345 bar (≤ 5004 psig).
Fluoramics’ Premium Full Density PTFE Tape is approved for oxygen service. Fluoramics has the testing documentation to show it is oxygen approved.

LOX-8 Full Density PTFE Tape is approved for oxygen service. Fluoramics has the testing documentation to show it is oxygen approved.

LOX-8 Full Density PTFE Tape is thick, and color-coded green for oxygen applications. It requires just two wraps to tightly seal just about any joint. Plus, if your application specs call for PTFE tape and thread sealant, we’ve got you covered. Simply apply LOX-8 Paste over Fluoramics PTFE tape and you’ll have an unbeatable combination that can handle even your toughest thread-sealing challenges!

LOX-8 Full Density PTFE Tape is oxygen safe and can be used on:

Shop Now: LOX-8 Full Density PTFE Tape

Shop Now: LOX-8 Paste