Fluoramics’ HinderRUST line of products combines surface film management to stop corrosion with Tufoil Technology to provide lubricity. As a result, HinderRUST products are not only great rust inhibitors but also excellent lubricants.

Tufoil Technology includes the elements engineered for Tufoil in the 1970s only after many years in the laboratory and the issuance of 11 U.S. patents. These technologies include the science of wetting and adhering to a piece of metal, and permanent suspension of friction-reducing particles within substrates in order to achieve extreme lubricity.

The extreme surface adhesion and aggressive wetting of HinderRUST means it maintains contact with metal surfaces, allowing it to migrate over the surface and wet into voids and crevasses. HinderRUST uses no solvents and remains fluid to keep from cracking or chipping.

This thin film technology is extremely surface-active and bonds to metal at the atomic level. This allows HinderRUST to remain mobile and to self-repair if the coating is scratched or compromised. The chemistry penetrates through to the base metal and creates a barrier against moisture and oxygen.

Because not all corrosion protection needs are the same, Fluoramics has engineered a full product line to meet the needs of many industries.

HinderRUST R2.0 ­­– The Rust Protector: This version is engineered to provide temporary surface protection. HinderRUST R2.0 provides temporary surface protection for metal parts after fabrication, or during storage and transportation. The chemistry can be removed with a mild solvent or water stream to allow for final fabrication and finish coatings.

HinderRUST S4.0 — The Rust Stopper: Our standard version, HinderRUST S4.0 is engineered to stop rust before it starts and to stop rust that has started. No surface prep is needed, and this version is weld-through approved.
HinderRUST HV100 — The Rust Shield: For extreme weather applications HinderRUST HV100 is applied using the same methods as R2.0 and HV100 but will self-polymerize over time. This natural cross-link polymerization using atmospheric oxygen creates a waxy film barrier to protect against extreme weather elements as well as to protect against some of the harshest environments.
Bust That Rust — A penetrating oil engineered to break through rust and aggressively wet beyond the area to which it is applied in order to break free seized nuts and bolts, lug nuts, flanges and other rusted metal parts.
Rust-Stopping Lubricating Oil – mobility, mobility, mobility. This lubricating oil provides not only great lubrication, but also corrosion protection. Our 12 ml pocket oiler with a hypodermic needle tip allows for precise application and fits into the smallest places. The lubricating oil will travel down into cracks and crevasses, displaces moisture and prevents corrosion.