What is the NSN for LOX-8 Thread Sealant?
830-00-829-3982
Is the size or length of the thread a limiting factor with Formula-8?
No. Even fine threads in instrumentation systems are sealed effectively over the entire thread length.
Why is Formula-8 superior for hard-to-reach locations?
Because the paste “wets” the thread surface and cannot be accidentally knocked loose due to obstructed access or visibility. [...]
Is Formula-8 easy to use?
Yes. All you do is coat the threads and immediately put the system back in service. There is no [...]
Can Formula-8 be used in food processing and handling equipment?
Formula-8 is NSF-approved for use in food processing areas, non-food contact.
When should I use Fluoramics’ other sealant product, LOX-8?
Use LOX-8 in wet or humid conditions and at higher pressures and temperatures.
Should I take any special precautions in handling Formula-8?
Yes, to avoid contamination, apply with a brush only used for Formula-8. Keep Formula-8 from freezing prior to application. [...]
Why is LOX-8 better than a cheaper substitute like tape?
The tiny particles in LOX-8 seal the microscopic cracks that tape cannot penetrate, so it’s much easier to apply [...]
At what temperatures and pressures can LOX-8 operate?
Temperatures up to 450°F and pressures up to 10,000 P.S.I.
What is the difference between LOX-8 Thread Sealant and LOX-8 Lubricant?
LOX-8 Thread Sealant is thicker and therefore normally used to seal the threads in pipe joints. LOX-8 Lubricant, being [...]
