Engineering Solutions Since 1967 LOX-8 Paste
LOX-8 Paste is engineered for harsh chemicals applications where extreme acids or powerful oxidizers are used. LOX-8 Paste can prevent stainless steel galling and it is a sealant that withstands high pressure, and extreme high temperatures, and cryogenic deep freeze temperatures. This versitale all-purpose sealant is oxygen-safe and waterproof.
-
This Dispensing Gun allows for easy 1-handed application of Fluoramics' products packaged in plungers.
Works with:
- 100 g (3.52 oz) LOX-8 Paste Plunger
- 100 g (3.52 oz) LOX-8 Grease NLGI 00 Plunger
- 100 g (3.52 oz) LOX-8 Grease NLGI 2 Plunger
*Style and color of Dispensing Gun may vary but all will accommodate Fluoramics’ plungers.
One Dispensing Gun per order, please.
-
LOX-8 Paste is a PTFE thread sealant that is highly recommended where oxygen or harsh chemicals such as chlorine or powerful oxidizers are present. It is the product of choice in applications where critical safety and resistance to aggressive chemicals are primary requirements. Providing superior performance as a sealant, LOX-8 withstands both high extreme temperatures and high pressure.
Specifically formulated for wet conditions, but can also be used in dry conditions. It is a high density sealant expressly designed for severe high-pressure applications.
- Odorless, noncorrosive, waterproof, non-migrating, and nonflammable
- NSF approved for use in food processing facilities.
Cage Code 28017
Available in a variety of packages. Please select "Size" pulldown below, and the price will adjust.
- 25 g (0.88 oz) Jar
- 100 g (3.52 oz) Jar
- 453 g (16 oz) Jar
- 100 g (3.52 oz) Plunger
100 g jar (3.52 oz.) - NSN 8030-00-829-3982 -
LOX-8 LD is engineered to seal large diameter pipes, 3/4" and larger. Use in environments where extended service life is important, as well as in chemical processing, industrial gases and other aggressive applications.
Typical Applications:
- off-shore rigging
- oxygen and chlorine systems
- cryogenics
- nitrous oxide systems
- medical equipment
- waste-water processing
- welding
- stainless steel anti-galling
*unlike our other LOX-8 products, LOX-8 LD has not been tested for oxygen service.
Available in a variety of packages. Please select "Size" pulldown below, and the price will adjust.
- 25 g (0.88 oz) Jar
- 453 g (16 oz) Jar
-
LOX-8 NF Oil is a product which will not fluoresce during black light inspections.
LOX-8 NF Oil is a low-viscosity inert PCTFE lubricant. It is engineered from oxygen-approved chemistries and allows for lubrication of critically clean surfaces requiring black light inspection.
Use LOX-8 NF Oil on:- O-rings
- rubber gaskets on cartridge filters
- gas supplies and filters for laser systems
- fitting assemblies on fill and control panels
-
LOX-8 Plumber’s Putty is a chemical-resistant putty engineered for sealing drains, sinks, chemical waste floor drains, or clean-outs in labs, medical and dental settings, or other areas which use acids, alkaline or caustic chemicals.
LOX-8 Plumber’s Putty is a non-hardening, non-flammable chemical-resistant plumber’s putty that will not degrade and leak like other putties. Use it with Orion, Watts and other chemical waste floor drains, clean-outs, sinks, and sink drains in laboratories, medical facilities, and other places which use aggressive chemicals. Safe to use with plastics.
Use LOX-8 Plumber’s Putty on:
- Hospital (Curb) Sinks and Drains
- Medical, Dental, and Surgical Sinks and Drains
- Laboratory Sinks and Drains
- Chemical Waste Floor Drains
- Clean-outs
Watch Demonstration Video:Available in a variety of packages. Please select "Size" pulldown below, and the price will adjust.
- 56.6 g (2 oz) Jar
- 453 g (16 oz) Jar
