Fluoramics Thread Sealants and Greases

Formula-8 seals threads in gas, liquid and vacuum service. Oxygen-safe and NSF approved for food processing facilities, Formula-8 is an aqueous-based thread sealant.

CAGE Code 28017    

Available in three sizes - 3.5 oz. Tube, 15 gram Tube, & 650 gram Jar

100g jar, (3.5 oz. tube) - NSN 8030-01-527-7193

Our new premium, full-density product requires just two wraps to tightly seal just about any joint. Plus, if your application specs call for PTFE tape and thread sealant, we've got you covered. Simply apply LOX-8 Paste over Fluoramics PTFE tape and you'll have an unbeatable combination that can handle even your toughest thread-sealing challenges! This product is oxygen safe and can be used on just about everything.

**Two sizes available:
1/2" x 260"
3/4" x 520"

Chem-8 is a great lubricant where sophisticated chemicals are packaged, or where corrosion or rusting is a problem. It is especially suitable for mechanical instruments such as hinges where repeated autoclaving is required.

LOX-8 Grease is a PTFE grease that is highly recommended where oxygen or harsh chemicals such as chlorine or powerful oxidizers are present. It is the product of choice in applications where critical safety and resistance to aggressive chemicals are primary requirements. Providing superior performance as a lubricant, LOX-8 withstands both high extreme temperatures and high pressure. 

Specifically formulated for wet conditions, but can also be used in dry conditions. It is a high density lubricant expressly designed for severe high-pressure applications.

• Odorless, noncorrosive, waterproof, non-migrating, and nonflammable
• NSF approved for use in food processing facilities

LOX-8 Paste is a PTFE thread sealant that is highly recommended where oxygen or harsh chemicals such as chlorine or powerful oxidizers are present. It is the product of choice in applications where critical safety and resistance to aggressive chemicals are primary requirements. Providing superior performance as a sealant, LOX-8 withstands both high extreme temperatures and high pressure. 

Specifically formulated for wet conditions, but can also be used in dry conditions. It is a high density sealant expressly designed for severe high-pressure applications.

• Odorless, noncorrosive, waterproof, non-migrating, and nonflammable
• NSF approved for use in food processing facilities.

Cage Code 28017

100g jar (3.5 oz.) - NSN 8030-00-829-3982

LOX-8 LD is engineered to seal large diameter pipes, 3/4" and larger. Use in environments where extended service life is important, as well as in chemical processing, industrial gases and other aggressive applications. 

Typical Applications:

• off-shore rigging
• oxygen and chlorine systems
• cryogenics
• nitrous oxide systems
• medical equipment
• waste-water processing
• welding
• stainless steel anti-galling

*unlike our other LOX-8 products, LOX-8 LD has not been tested for oxygen service.