0 items in cart
Our new premium, full-density product requires just two wraps to tightly seal just about any joint. Plus, if your application specs call for PTFE tape and thread sealant, we've got you covered. Simply apply LOX-8 Paste over Fluoramics PTFE tape and you'll have an unbeatable combination that can handle even your toughest thread-sealing challenges! This product is oxygen safe and can be used on just about everything.
**Two sizes available:1/2" x 260"3/4" x 520"
Most of the PTFE tape on the market is flimsy, low-density stuff that is difficult to apply and shreds too easily when the joint is torqued. When you need to seal large-diameter fittings or fittings on high-pressure systems, regular tape can’t handle the job. Worse yet, it costs too much. Not so with Fluoramics PTFE tape.
Fluoramics tape is a premium full-density product that requires just two wraps to tightly seal just about any joint. It’s available in ½” and ¾” widths, and is approved for use in oxygen service.
And when your application specs call for PTFE tape and a thread sealant, Fluoramics has you covered. Simply apply LOX-8 paste over Fluoramics PTFE tape and you’ll have an unbeatable combination that can handle your toughest thread-sealing challenges, including systems exposed to caustic acids and bases.
CAGE: 28017 DUNS: 044124451
902 East 2nd Street, Suite 326 Winona, MN 55987
Sign up to receive occasional product information.