Product Name:  Tufoil Compu-Lube

Manufacturer:  Fluoramics Inc.
Address:  18 Industrial Avenue, Mahwah, N.J.  07430

Emergency Phone:  201-825-8110 
Information Phone:  1-800-922-0075
Fax Number:  201-825-7035

Product use:  Lubricant
 

Flash Point & Method Used:  435º F - ASTM D 92
Flammability Limits in Air % by Volume:  N/A
Extinguisher Media:  Carbon Dioxide - Dry Chemical
Special Fire Fighting Procedures:  Cool exposed containers with water.
Unusual fire and Explosion Hazards:  Do not store or mix with strong oxidants.

Stability:  Stable
Conditions to Avoid:  Excessive heat - direct flame
Incompatability (Materials to Avoid):  Strong oxidants, ie Liquid Chlorine or Concentrated Oxygen
Hazardous Decomposition Products:  CO₂  - Trace quantities of fluorides. Decompose product above 500º F
Hazardous Polymerization:  Will not occur

Primary Routes of Entry:  Inhalation, skin absorption, ingestion
Health Hazards:  Acute - treat symptomatically
Signs and Symptoms of Exposure:  Prolonged & repeated over-exposure may irritate the skin or some individuals.
Medical Conditions Generally Aggravated by Exposure:  See below.
Eye Contact:  Wash with copious amounts of water.
Skin Contact:  Remove by wiping and wash with soap and water.
Inhalation:  Remove from exposure to fumes
Ingestion:  Treat symptomatically.  Call physician.
Emergency First Aid Procedures:  Seek medical assistance for further treatment, observation and support if necessary.

Respiratory Protection (Specify Type):  Usually none..
Protective Gloves:  Oil proof
Eye Protection:  Safety goggles
Ventilation to be Used:  Usually none.  Particle removing air purifier - respirator (mechanical) filter
Other Protective Clothing and Equipment:  Protective garment when applicable.
Hygienic Work Practices:  As indicated.

Steps to be Taken if Material is Spilled or Released:  Stop flow, absorb or scrape up
Waste Disposal Methods:  Sealed drum containment.
Precautions to be Taken in Handling and Storage:  Keep containers closed when not in use.  Avoid excessive heat or direct flame.
Other Precautions and/or Special Hazards:  Avoid frequent or prolonged skin contact or inhalation of fumes, mists and vapors.

U.S.  (49 CFR):  Proper Shipping Name:  Non-Hazardous Material
IATA:  Proper Shipping Name:  Non-Dangerous Goods
IMDG:  Proper Shipping Name:  Non-Dangerous Goods

Physical Properties:

Appearance:  Amber
Odor:  Mild petroleum odor
Physical state:  Liquid
pH as supplied
Boiling Point:  N/A
Melting Point:  N/A
Freezing Point:  N/A
Vapor Pressure (mmHg):  Nil
Vapor Density (air=1):  N/A
Specific Gravity (H20=1):  9050
Evaporation rate:  N/A
Solubility in water:  Insoluble in cold water

Stability:  Stable
Conditions to avoid:  Temperatures above 250F without adequate ventilation.  Will not polymerize
Incompatibility (Material to Avoid):  Strong acids, bases and oxidizing agents
Hazardous decomposition or by-products:  Carbon dioxide, carbon monoxide, unburned hydrocarbons and traces of sulfer, phosphorus or nitrogen, PTFE Decomposition product.

No toxicology data available

Do not allow to enter soil, waterways or wastewater

Waste Disposal Method:  Follow all local, state and federal regulations 
RCRA Hazard Class:  Determine if this material is a RCRA Hazardous Waste at the time of disposal

Transportation Information:  N/A

Non-hazardous product
U.S. Federal Regulations:  TSCA (Toxic Substance Control Act):
The components of this product are listed
SARA Title III (Superfund Amendments and Reauthorization Act):
311/312 Hazard Categories:  No Hazard categories identified

Date prepared:  May 2, 2006